Buying skills of integral cabinets:

Look at the edge of the plate. The edge sealing of high-quality cabinets is delicate, smooth, feel good, the sealing line is straight and smooth, and the joint is fine. Professional large factories use straight-line edge sealing machine to complete edge sealing, head breaking, edge trimming, chamfering, polishing and other processes at one time to ensure accurate dimensions. And the small workshop factory is to apply glue with brushes, manually press and seal the edges, trim the edges with wallpaper knives, and polish them with manual polishing machines. Due to uneven pressure, many places are not firm, and harmful substances such as formaldehyde will volatilize into the air.

Second, look at the punch. Panel furniture is assembled by three-in-one connectors, and the coordination and accuracy of the hole position will affect the structural firmness of the Ambry box.

Look at the cutting board. Board cutting is a process of cabinet production. Large specialized enterprises use electronic cutting saws to input processing dimensions through computers, and the dimensional accuracy of material selection is controlled by computers, and several sheets can be processed at one time, the performance of the equipment is stable, the dimensional accuracy of the plates is very high, and the tolerance unit is in microns.

Four door panels. The door panel is the face of the cupboard, which is as important as the human face. The door panels produced by small factories are easily deformed by moisture due to improper treatment of substrate and surface technology.

Fifth, look at the assembly effect of the whole set of cabinets. Any dimensional error in the production process will be shown on the door panel, small factory production combination of cabinets, door panel will appear door seam is not straight, gap is uneven, there are large and small.

Six, look at the slide of the drawer. Although it is a small detail, it is an important part that affects the quality of cabinets. Due to the hole position and size error, there is an error in the installation size of the slide rail, resulting in the drawer pulling is not smooth or left and right loose, but also pay attention to whether the drawer gap is uniform.