What is the quality of the overall stainless steel cabinets:

With the popularity of the overall Ambry, people began to have a new understanding and requirements of the kitchen, so how to identify the pros and cons of a set of cabinets? The author reminds consumers to focus on the following aspects to ensure the overall performance of the cabinets:

1. Table top. Mesa is generally divided into three kinds: quartz stone Mesa, artificial stone Mesa, stainless steel Mesa, mostly quartz Mesa on the market because quartz stone hard should not be affected by thermal expansion and cold shrinkage.

2. Cabinet board. Check the cabinet board, that is, from the cut section to see whether the cabinet board is particleboard, MDF or moisture-proof board. If MDF is used, the quality is worse.

3. Door panel. Identify the door panel. There are many types of cabinet door panels in the market, such as fire prevention board, Egg board, lacquer board, etc., and there are different inspection standards for different decorative panels. Here are mainly introduced three commonly used testing methods: for edge-sealing panels, it is necessary to check the edge-sealing interface, if the edge is not firmly sealed, there are many "dog teeth" at the interface, then the quality is not good; For unsealed decorative panels, to check the overall flatness, glossiness, color, if the surface is not smooth, no gloss or color difference, the quality of the cabinet door is poor. In addition, the quality of the substrate used can be seen from the hinge hole of the door panel. If the substrate is MDF, the quality is not good.

4. Hardware accessories. Identify hardware accessories. Hardware accessories for cabinets are very important, with stainless steel hardware accessories.

5. Structural accessories. Identify structural accessories. The problem that should be paid attention to is to check whether the material of the connector is corroded or whether it is strong enough. If you detect the hinge of the cabinet door, you can open and close the door several times, and at the same time observe whether the position of the screw hole is hidden and whether it is in place.

6. Cabinet craftsmanship and details. Dustproof angle, anti-collision strip, ground line.

7. Appearance. Whether the curve is slippery and textured.